How to add an image to your post

1) Firstly create a topic or reply to a post add your text and subject name if required. Next Click host image which is shown below with a red box.




2) Clicking the red box should give you the following. If you have an account type in your email address and password if not click Subscribe boxed in orange.




3) If you are subscribed skip this next part.
If your not subscribed after click Subscribe on the pervious part you will receive the following from here click JOIN for FREE boxed in red on the image shown below.




4) If you are subscribed skip this next part.
If your not and you clicked JOIN for FREE you should see the following fill out the details and click save (boxed in red on the below image).




5) If you are subscribed skip this next part.
If your not and you filled out the form right you should see the following (shown below).


Proceed to your emails and check for the email.
Some email services like hotmail may place it in junk mail so don't forget to check.


6) If you are subscribed skip this next part.
When you check your email you will see the following click the link or copy and paste in to your internet browser the link is underlined in red.




7) If you are subscribed skip this next part.
If you following the email link you should see the following which will then automatically take you back to the start you can now close this page and go back to your forum post.




So now you should be here if you have been skipping parts you should follow from here on. Enter the email you used to subscribe and the password you used as well, and click login boxed in red.




9) Now you should see the following click Browse.. And find your image. Select resize image if small select no, if large select 800 px width (for forums) and click Host It




10) You should now see the following and click Copy on the one boxed in red.




11) Next click the box shown below boxed with red and has a 1 in it, you should then see the box with the OK boxed in red with a number 2 next to it. Paste your link in the box with the blue line around it above the number 2, select where you want your image to go by placing you curser and clicking where the text is. Once you are happy where it will appear click OK boxed in red with the number 2 next to it.




12) Now you should have something similar to the below you can click preview boxed below in red to see your current post and what it will look link if you are happy click send, shown below by the green box.